xrayabsorption.org
Tutorials, Books, and other Resources
Videos of Lectures and Demos
Training Workshops and Short Courses
Software
Databases
Experiments
Applications
Theory
Analysis
Related Techniques
Acronyms and Terms for X-ray Absorption Spectroscopy
Community
About this site
xrayabsorption.org
»
<no title>
View page source
Energy Calibration Standards
What purpose does the calibration standard serve?
How is the calibration standard used?
How to replace a broken mylar window on a Lytle Chamber
Step 1. Taking the plate apart from the detector
Step 2. Stretching the aluminized mylar
Step 3. Epoxy the Ring to Mylar
Step 4. Screw the two halves of the front ring together
Step 5: Re-assemble the stack of conducting rings
Step 6: Re-attache the BNC connectors
Step 7. Final assembly
Sample-related distortions to measured data
Tutorials and software
Literature references
Preparing Doubly Contained Samples for XAS Measurement
Step 0: Preparing your sample
Step 1: Preparing the kapton tape
Step 2: Cover one side of the sample frame
Step 3: Load the sample
Step 4: Finishing off the sample holder
Step 5: Preparing the secondary containment.
Step 6: Finishing the secondary containment
Further considerations